Mailgun Review 2026

Written by

in

Best for developers and product teams that want a fast, API-first way to send transactional and bulk email: Mailgun

Mailgun is the email delivery platform that developers reach for when an application needs to send email reliably, at scale, without babysitting mail servers. Your code calls its RESTful API or connects over SMTP, and Mailgun delivers the message from infrastructure trusted to send more than 600 billion emails a year. Behind that scale sits a product built the way developers like it: clean APIs, official SDKs, event webhooks, inbound email routing, batch sending. A deliverability suite called Mailgun Optimize watches inbox placement, spam traps and blocklists for you. This Mailgun review works through the whole picture, because Mailgun sells sending, deliverability and validation as three related products. The price you pay depends on which ones you need.

Getting the price right matters more than it looks. Mailgun charges by volume. A team that sends 10,000 emails a month pays $15 on Basic, while a team that sends 100,000 emails pays $75 on Foundation or $90 on Scale. The difference between those two plans is the features around the sending rather than the sending itself. Meanwhile the free plan sends 100 emails a day forever, which makes Mailgun one of the friendliest places to start, yet its log retention is only one day on the cheaper plans. Dedicated IPs cost extra until you reach higher volumes. Older guides still describe the retired Flex pay-as-you-go plan, so this Mailgun review checks every price on Mailgun’s official pricing page on 16 November 2026, and it flags the places where the old guides are wrong.

What this Mailgun review covers

This Mailgun review covers what Mailgun is and who it fits, the full 2026 pricing picture for Mailgun Send, Optimize and Inspect, how setup and domain authentication work, the key features and what Mailgun does not include, deliverability and dedicated IP warm-up, and a head-to-head comparison with Twilio SendGrid, Amazon SES and Postmark. Every price below was checked on Mailgun’s official pricing page on 16 November 2026. We checked every rival figure against the vendor’s own pricing page the same day. By the end you should know exactly what Mailgun costs at your volume, when Optimize is worth paying for, and when a cheaper rival is the smarter buy.

Visit Mailgun →Compare with SendGrid

Prices checked 16 November 2026 on Mailgun’s official pricing page. Features and pricing can change, so please check the provider’s site before you buy.

Quick Answer

Mailgun is the best developer-first choice for a product team that sends transactional and bulk email through an API. The free plan sends 100 emails a day at $0, Basic costs $15 a month for 10,000 emails, Foundation costs $35 a month for 50,000 emails with the first month free, and Scale costs $90 a month for 100,000 emails, also with the first month free.

You get a fast RESTful API and SMTP relay, batch sending of up to 1,000 personalised emails in a single call, inbound email routing, event webhooks, email validation and automated dedicated IP warm-up, all on infrastructure that sends more than 600 billion emails a year. It is not the cheapest option — Amazon SES sends the same 100,000 emails for $10 — and it is not a marketing tool or a cold email tool. For permission-based transactional and bulk email sent from code, though, Mailgun is the cleanest, most developer-friendly platform in this comparison.

Contents

What Mailgun actually is

Mailgun is a cloud email delivery service, owned by Sinch, that lets any application send, receive and track email at scale without running its own mail servers. In practice, your code calls the Mailgun RESTful API, or your system connects over SMTP, and Sinch handles the delivery. Mailgun describes itself as an email delivery and deliverability service that empowers businesses to send email from their applications, built on cloud infrastructure that handles billions of emails a month so customers never deal with the complexity of maintaining their own servers. It is trusted to send more than 600 billion emails a year. It offers data residency in both the United States and the European Union from a single account. That scale is the point: Mailgun is infrastructure that already serves products sending millions of messages, from tiny startups to enterprises.

Mailgun is the API with a dashboard, not just the API

In short, think of Mailgun as the API with a proper dashboard attached. It sends the email, and it also gives you somewhere clear to watch it happen. For example, a developer can plug the API into an application and start sending password resets, receipts and shipping notices within an afternoon, then open the Mailgun dashboard to see delivery, opens, clicks, bounces and spam reports in real time. A support engineer on the same account can open the logs to trace a single message by its event history, with error codes and exact timestamps. That combination is exactly what separates Mailgun from Amazon SES, which sends email just as reliably yet offers far less visibility without extra AWS tooling.

Indeed, Mailgun began in 2010 as a developer-focused startup, and Sinch acquired it in 2021. Since then Mailgun has grown from a single sending API into a small family of products: Mailgun Send for delivery, Mailgun Optimize for deliverability, and Mailgun Inspect for email testing. The website now carries the Sinch Email header, and older guides still link to pricing pages and plan names that have changed. As a result, this Mailgun review links to the live Mailgun pricing page throughout. Every price below comes from that page, checked on 16 November 2026.

Three products share one Mailgun account

Three products share one Mailgun account, and mixing them up is the most common pricing mistake buyers make. Mailgun Send is the delivery product: it sends the transactional and bulk email your application generates, such as welcome messages, password resets, receipts and alerts. It charges by the number of emails you send each month. Optimize is the deliverability product: it adds inbox placement tests, spam-trap and blocklist monitoring, bulk email verification and deliverability services. It is priced separately from Send. Inspect is the testing product: it previews how an email renders and checks it before you send. You buy Send on its own, and you add Optimize or Inspect only if you need them, which is why this Mailgun review prices Send in detail below and treats the other two as add-ons.

Three kinds of email run through Mailgun every day. Transactional email comes first: password resets, receipts, order confirmations, shipping updates and alerts that a customer expects seconds after an action. Bulk email comes second: newsletters and announcements sent to subscribers who opted in, delivered through the same API with mailing lists and recipient variables. Inbound email comes third: replies and incoming messages that Mailgun routes and parses into clean JSON for your application to act on. Mailgun handles all three, and its batch sending and event webhooks are built for exactly that mix. What Mailgun never does is find recipients for you, write cold outreach sequences or warm up inboxes for prospecting. Mailgun is built for mail people expect, and its acceptable-use rules reflect that.

Who Mailgun fits best — and who should skip it

Mailgun fits a developer or a product team that sends email from code every day and wants the sending to simply work. If your application already sends password resets, receipts and alerts. Your team is comfortable with an API key, a webhook and a DNS record, Mailgun covers the job with less fuss than almost any rival. It also fits a growing SaaS business that needs to scale from hundreds to millions of emails a month without changing provider, because the plan ladder runs from a free tier to custom Enterprise pricing with Rapid Fire burst sending. The API is fast and well documented, the SDKs cover the major languages. The dashboard is clear enough that a non-developer can trace a single message without asking engineering for help.

For a small business with a developer on call, Mailgun still works, provided the email you send is mostly transactional or bulk mail to people who asked for it, as this Mailgun review explains below. The free plan sends 100 emails a day with no card required, which is generous for testing and for a hobby project, and Basic at $15 a month removes the daily limit for production sending. Our best cold email tools for beginners roundup covers tools built for outreach instead, because Mailgun is not one of those. For expected, permission-based email sent from an application, however, Mailgun is one of the easiest serious platforms to start with.

Who should think twice in this Mailgun review

On the other hand, three kinds of buyer should think twice. First comes the buyer who wants the cheapest sending available and already has a developer. Amazon SES sends 100,000 emails for $10 on its pay-as-you-go rate, while Mailgun Foundation charges $75 for the same volume. The gap stays wide at a million emails. Our Amazon SES review works through that maths in detail. A team with a developer and a clean list should take the SES saving, because Mailgun’s extra tooling is only worth paying for if you actually use it.

Cold emailers should pause

The second buyer who should pause is the cold emailer. Mailgun is not a cold outreach tool, and using it that way risks your account. Mailgun offers no B2B contact database, no prospecting sequences, no LinkedIn automation and no inbox rotation for cold sending. Sinch expects permission-based sending, and high bounce or complaint rates can get an account suspended. A team planning cold outreach should start with our best cold email software roundup, while our Instantly review covers a tool designed for that job. Mailgun is for mail your recipients asked for, and it performs best when that is true.

Marketers without a developer should pause

The third is the buyer who wants a marketing suite with a send button. Mailgun’s own pricing page says it plainly: there is no send button in Mailgun. You send through the API or SMTP from your own application. The template builder helps you design the message, yet there is no campaign builder, no drag-and-drop newsletter editor and no list manager to match SendGrid’s Marketing Campaigns. A marketer who wants to design and send a newsletter without a developer should read our SendGrid review instead, because that product has the marketer’s half built in. Mailgun earns its price when a developer drives the sending, and not before.

Pricing in this Mailgun review: Send, Optimize and Inspect

Mailgun pricing comes down to two questions: how much email you send each month, and whether you also need the deliverability and testing products. Mailgun Send charges by monthly send volume, while Optimize and Inspect are priced separately as add-ons. All four Send plans start with the same core — the RESTful API, SMTP relay, tracking, analytics and webhooks — and the higher plans add domains, log retention, validations and support. The table below in this Mailgun review shows the starting prices from Mailgun’s official pricing page, checked on 16 November 2026. When a plan’s price climbs with volume, the table says so, because the pricing page shows starting prices and lets you pick your volume on a slider.

Mailgun Send pricing: Free, Basic, Foundation and Scale

Mailgun Send starts with a free plan that costs $0 and lets you send 100 emails a day, with one custom sending domain, one API key, one inbound route, one day of log retention and ticket support.

After the free plan you need a paid plan to send more. Basic starts at $15 a month for 10,000 emails, with no daily limit, one custom sending domain, one API key, five inbound routes and one day of log retention. Foundation starts at $35 a month for 50,000 emails, with the first month free. It costs $75 a month for 100,000 emails. Scale starts at $90 a month for 100,000 emails, also with the first month free. Its price rises with volume up to 2.5 million emails a month. Taxes may apply on top of the monthly rate. Overage is billed at the start of each month for the previous month’s extra emails.

How the Mailgun plans differ

What changes between the plans is more than volume. Foundation adds 1,000 custom sending domains, the email template builder and API, full inbound routing, five days of log retention and one day of message retention, plus unlimited users with five user roles. Scale adds SAML single sign-on, 5,000 email validations included, dedicated IP pools, Send Time Optimization, live phone and chat support, 30 days of log retention, up to seven days of message retention, and scheduled analytics reports. The overage rate also falls as you climb: from $1.80 per 1,000 extra emails on Basic, to $1.30 on Foundation, to $1.10 on Scale. Extra validations cost from $1.20 per 100 on Basic and Foundation, and from $0.80 per 100 on Scale.

Mailgun review: four ascending pricing plan steps with growing envelope stacks, showing how Mailgun charges by monthly email volume
Mailgun charges by monthly volume: Free at 100 emails a day, Basic at $15, Foundation at $35 and Scale at $90. Pick your volume on Mailgun’s pricing page before you judge the price.

Dedicated IPs in this Mailgun review: included late, and $59 each after that

Dedicated IPs are the part of Mailgun pricing that surprises buyers most, so this Mailgun review spells it out. A dedicated IP is included with Foundation once you reach 100,000 emails a month, and with Scale plans, while lower volumes send from shared IPs. After that, additional dedicated IPs cost $59 per IP per month, added from the control panel or through support. That matters because a sender that wants its own IP at 50,000 emails a month must pay for it on top of Foundation, while a sender at 100,000 emails gets one included. Shared IPs are fine for most senders. Mailgun’s automated dedicated IP warm-up protects a new IP when you do move to one. Still, budget the $59 if your volume sits below the included threshold and you want your reputation to depend only on your own sending.

Optimize and Inspect in this Mailgun review: separate products, separate prices

Mailgun Optimize and Mailgun Inspect are sold separately from Send. That separation is easy to miss on the pricing page. Optimize is the deliverability suite from Matthew’s profile: inbox placement tests, spam-trap and blocklist monitoring, and bulk email verification, plus deliverability services where a Mailgun expert advises on your IP setup. Inspect is the testing product that previews an email before you send it. Both are priced on their own pages. Neither is bundled into the Send plans, so a buyer who wants the full deliverability toolkit should budget for Optimize on top of Send. We do not list their prices here, because they are shown on Mailgun’s product pages rather than the Send pricing page — check Mailgun’s site for the current Optimize and Inspect prices before you plan around them.

What Mailgun costs at your volume in this Mailgun review

At 10,000 emails a month, Mailgun Basic costs $15, which works out to $1.50 per 1,000 emails inside the plan. Foundation at 50,000 emails costs $35, or $0.70 per 1,000. For 100,000 emails, Foundation costs $75, or $0.75 per 1,000, while Scale costs $90 for the same volume, or $0.90 per 1,000 — more than Foundation, because Scale bundles the validations, the dedicated IP pools, Send Time Optimization and phone support. That comparison is the honest way to read Mailgun pricing: Foundation is the cheap sending tier. Scale is the tier where you pay for the product around the sending. A sender that only needs delivery should stay on Foundation. A sender that needs its own IP pools, validation and support should move to Scale and use those features, or the extra $15 a month is wasted.

When overage costs more than upgrading

Meanwhile, a sender that regularly exceeds its plan should upgrade rather than pay overage, because overage on Basic costs $1.80 per 1,000 emails, which is more than the plan’s own per-email cost. A team sending 21,000 emails a month, for example, pays $15 plus about $20 in overage on Basic, which is already more than Foundation’s $35 for 50,000 emails. On the other hand, a sender that only needs a few thousand emails a month will find the free plan hard to beat, because 100 emails a day covers roughly 3,000 emails a month at no cost at all. The right move is to run your own volume through Mailgun’s pricing page slider and check the overage rate for your tier, since regularly paying overages costs more than upgrading to the next tier.

The Mailgun pricing table in this Mailgun review

PlanPriceWhat you getBest for
Mailgun Send — FreeBest for testing$0 a month
100 emails a day
API and SMTP relay, 1 custom domain, 1 API key, tracking and analytics, 1-day log retention, 1 inbound route, ticket supportTesting Mailgun and tiny projects
Mailgun Send — Basic$15 a month
10,000 emails; overage from $1.80 per 1,000
No daily limit, 1 custom domain, 1 API key, 5 inbound routes, 1-day log retention, customizable dashboardSmall products sending up to 10,000 emails a month
Mailgun Send — Foundation$35 a month
50,000 emails; $75 for 100,000; overage from $1.30 per 1,000
Everything in Basic, plus 1,000 domains, template builder and API, full inbound routing, 5-day logs, unlimited usersGrowing senders up to 100,000 emails a month
Mailgun Send — Scale$90 a month
100,000 emails, rising with volume to 2.5 million; overage from $1.10 per 1,000
Everything in Foundation, plus SAML SSO, 5,000 validations, dedicated IP pools, Send Time Optimization, phone and chat support, 30-day logsHigh-volume senders that need their own IPs and support
Mailgun Send — EnterpriseCustom pricingEverything in Scale, plus custom features, deliverability services and Rapid Fire burst sending SLAVery high-volume senders with custom needs
Mailgun OptimizePriced separately
Check Mailgun’s site
Inbox placement tests, spam-trap and blocklist monitoring, bulk email verification, deliverability servicesSenders that want to watch deliverability closely
Mailgun InspectPriced separately
Check Mailgun’s site
Email rendering previews and pre-send testingTeams that want to check email before sending

Last checked: 16 November 2026 on Mailgun’s official pricing page. Prices are in US dollars before tax, and overage is billed at the start of each month for the previous month. Features and pricing can change, so please check the provider’s site before you buy. We do not guess at features, prices or trials.

Setting up Mailgun: account, domain and your first send

Setting up Mailgun takes minutes for a test send and a little longer for a production setup. The difference is worth understanding before you start. You create a Mailgun account, add a domain, and verify it with the SPF, DKIM and DMARC records that mailbox providers expect. For testing, Mailgun gives you a sandbox domain: you add a few authorised recipients. You can send to them straight away. For production, you add your own domain instead, which is the setup every real sender needs. Our sending domain guide walks through those three records in plain language, and they are the foundation of every Mailgun setup.

After that, you create an API key with only the permissions you need. Mailgun supports role-based API keys, so a sending key can send mail and nothing else. That is good advice: an API key is a long secret password, and anyone who holds it can send email as you. Keep it in an environment variable, never in your code repository, and rotate it the moment it leaks. Mailgun also offers two-factor authentication on the account, which you should turn on from day one. A restricted key plus two-factor authentication takes five minutes and guards against the most common account takeover.

The three Mailgun setup steps in this Mailgun review

Mailgun review: a laptop with a code window, an API key and a domain globe linked to DNS record cards, showing how Mailgun setup works
Mailgun setup has three steps: add a domain, publish its DNS records, and create an API key. The sandbox domain lets you test before you touch DNS.

Video: Start Sending – Mailgun Walkthrough by Sinch Mailgun on YouTube. This video is the creator’s property, embedded via YouTube for education. OutreachCompare is not affiliated with Sinch Mailgun and does not claim ownership of this video.

Watch the video above for Mailgun’s own walkthrough of the first send. It shows how to generate an API key, use the sample code to send an email through the API, and set up SMTP credentials instead if your system works that way. The same steps apply in every language Mailgun supports, because the API key and the domain authentication are the two pieces every integration needs, whether your application is written in Python, Node.js, PHP, Ruby, Go, Java or C#. Mailgun publishes official SDKs and interactive API documentation that lets you test a send from the browser. The first test rarely takes more than a few minutes.

Mailgun review: your first send after the key is ready

Your first send is a single API call to the messages endpoint. Mailgun’s documentation shows the exact code for each language. You pass your API key, your verified sending domain, a recipient, a subject and your content, and Mailgun returns a message ID you can track. The free plan lets you send 100 emails a day, which is plenty for testing templates, webhooks and error handling. Send a test to your own addresses at Gmail, Outlook and Yahoo, check where each message lands, and look at the logs to confirm the delivery events. That quick test reveals more about your setup than hours of reading ever will.

Mailgun review: authenticate before you send real mail

Before you send to real customers, finish domain authentication and check your DNS records carefully. Domain authentication adds the SPF, DKIM and DMARC records that prove Mailgun sends on your behalf. Mailgun also supports BIMI for a verified brand logo in the inbox. Each of those steps lifts inbox placement, and Mailgun includes both on every plan. Skipping authentication is the most common reason new senders land in spam: the mail itself is fine, yet the mailbox provider cannot confirm who sent it. Mailgun’s setup guide walks through the DNS records step by step, and your domain registrar or DNS host can help if the record format looks unfamiliar.

Key features: API, routing, templates and analytics

Mailgun’s feature set is built around one idea: your application sends the email. Mailgun handles everything that happens after you press send. The RESTful API accepts messages through a simple HTTP call or SMTP relay. Almost any application can use it without changing its architecture. Official SDKs cover the major languages. The API supports batch sending of up to 1,000 fully personalised emails in a single call, scheduled sends and large messages. Event webhooks report every delivery event — queued, accepted, delivered, opened, clicked, bounced, dropped and complained — back to your application in real time. You can react to a bounce the moment it happens instead of discovering it in a monthly report.

Batch sending saves time in this Mailgun review

Batch sending is the feature that makes Mailgun fast at real volumes. With a single API call you can send up to 1,000 fully personalised emails, using recipient variables to fill in each person’s name, order number or reset link, and Mailgun assembles each message individually. That makes sending large volumes far quicker and far less resource intensive than looping through a thousand separate calls. A newsletter to 50,000 subscribers, for example, needs only 50 calls instead of 50,000. Combined with mailing lists and recipient variables, batch sending is the reason Mailgun handles bulk email through the same API as transactional mail, without a separate campaign tool.

Video: Introducing the new Mailgun by Sinch Mailgun on YouTube. This video is the creator’s property, embedded via YouTube for education. OutreachCompare is not affiliated with Sinch Mailgun and does not claim ownership of this video.

Watch the video above for a tour of the new Mailgun dashboard. It shows where to find your email analytics, performance statistics for each domain, email validations and more, and it walks through the messages, routes, validations and settings screens. The tour is useful because Mailgun’s dashboard is where most of the day-to-day work happens: checking a message’s event history, watching a domain’s performance, and finding the validation results. A new user who spends ten minutes on that tour will find the dashboard far less confusing afterwards.

Inbound routes turn replies into data in this Mailgun review

Inbound routing is Mailgun’s most underrated feature. Routes parse your incoming email streams and convert them to clean UTF-8 JSON. Your application can act on a reply without parsing raw mail itself. A support inbox, for example, can forward every reply into your ticketing system automatically, while a reply-to address on a newsletter can trigger an unsubscribe or a human follow-up. Each domain inside Mailgun is an isolated sub-account with its own sending queue and reputation, so your transactional mail never gets stuck behind your newsletters. You can manage thousands of your own customers inside a single account. If one customer’s domain starts spamming, Mailgun can disable that domain without affecting your good customers.

Templates, validation and analytics in this Mailgun review

Email templates are the feature that makes transactional mail feel personal without hand-writing every message. You design a template once in the template builder, add placeholders for the customer’s name, order number or reset link, and your application fills them in for each recipient through the template API. Email validation is Mailgun’s quiet workhorse: the validation API checks addresses in real time before you send, which cuts bounce rates and protects your sender reputation. Scale includes 5,000 validations a month. Analytics complete the picture, tracking opens, clicks, bounces, unsubscribes and delivery events, with a customisable dashboard that lets each team member see the numbers they care about.

What Mailgun does not include, and why that matters

Honesty requires saying what Mailgun does not do. It has no B2B contact database, no lead finder and no email verifier for prospecting lists. A cold outreach team still needs a data provider. Our best B2B data providers roundup handles that side of the job. Mailgun also lacks LinkedIn automation, cold sequences and a warm-up pool for cold inboxes. It has no CRM, no landing page builder and no visual campaign builder with a send button. Its analytics are sending analytics rather than a marketing automation suite. Searchable log retention is also short: one day on the free and Basic plans, five days on Foundation and 30 days on Scale, while Postmark includes 45 days of full-content logs. None of these gaps matter for transactional email sent from code, yet they decide whether Mailgun fits a buyer whose needs go beyond sending.

Deliverability and warm-up: Optimize, IPs and reputation

Deliverability is where Mailgun earns its reputation, and this Mailgun review spends time here because it decides whether your email reaches the inbox or the spam folder. Mailgun’s infrastructure sends more than 600 billion emails a year, and its Rapid Fire delivery SLA guarantees 99% attempted delivery of up to 15 million messages within the first five minutes of sending, with throughput of up to 72 million message requests an hour. Those numbers come from the vendor, so read them as a claim about the platform, not a promise about your account. Your own results depend on your list, your content and your authentication, which is exactly why Mailgun gives you the tools to watch them.

Mailgun review: an inbox placement gauge, a shield with a checkmark and envelopes landing safely in an inbox, showing Mailgun Optimize deliverability
Mailgun Optimize watches inbox placement, spam traps and blocklists, so you can see where email lands and fix what drags it down.

Mailgun Optimize is the main deliverability tool. It runs inbox placement tests that show where your mail lands at each mailbox provider, monitors spam traps and blocklists that can quietly destroy a sender’s reputation, and verifies email addresses in bulk before you send. Deliverability services add a human expert who investigates your IP setup and advises on the exact number and types of IPs your sending needs. Together these tools hand a sender everything needed to catch a problem early, which counts for far more than any single deliverability percentage on a marketing page. Remember, though, that Optimize is priced separately from Send, so budget for it if you want the full toolkit.

Dedicated IPs and automated warm-up in this Mailgun review

IP choice is the biggest deliverability decision a Mailgun buyer makes. Lower plans send from shared IPs, which means your reputation is partly shared with strangers, for better and for worse. Foundation at 100,000 emails a month and Scale plans include one dedicated IP, with more available at $59 each. Mailgun offers dedicated IP pools on Scale so different kinds of mail can send from different IPs. Automated dedicated IP warm-up matters because a brand-new IP has no reputation, and mailbox providers distrust sudden volume from an unknown sender. Mailgun’s automated warm-up raises your volume gradually over days and weeks, building reputation safely instead of blasting a full list on day one. A sender that buys a dedicated IP should let the warm-up finish before sending at full volume, or the IP’s reputation will suffer before it starts.

Reputation rules you should respect from day one

Beyond the IP, reputation comes down to habits. Mail only people who opted in, drop addresses that bounce, honour unsubscribes straight away, and keep complaint rates low. Mailgun watches bounce and complaint rates. Accounts that abuse the platform can be suspended, so the rules are not theoretical. Suppression management helps: Mailgun keeps lists of addresses that bounced, complained or unsubscribed, and it stops you sending to them again. That one habit prevents the most common reputation damage in email: mailing the same dead address week after week. Our email verification tools roundup lists services that clean a list before you send, while our warmup tools roundup handles the warm-up side for cold outreach. For transactional and bulk mail, Mailgun’s own validation, suppression lists and Optimize monitoring are usually enough, provided you actually use them every week.

Mailgun against SendGrid, Amazon SES and Postmark

Mailgun’s closest rivals each win on one thing, and the comparison below makes the trade-offs plain. Amazon SES wins on price at every volume. Twilio SendGrid wins on breadth, because it pairs a serious API with a marketing campaign product. Postmark wins on transactional speed and long activity logs. Mailgun wins on developer-first tooling: the cleanest API, batch sending, inbound routing and the Optimize deliverability suite. Your choice should follow whichever strength your team genuinely needs, so read the table against your own volume and your own team.

SendGrid: the broader rival in this Mailgun review

Twilio SendGrid is the rival most teams compare Mailgun against, and the difference is breadth against depth. SendGrid offers a 60-day free trial at 100 emails a day, then Essentials from $19.95 a month for 50,000 emails, or $34.95 for 100,000, while Pro starts at $89.95 a month for 100,000 emails with a dedicated IP included. SendGrid also sells Marketing Campaigns as a separate product from $15 a month, with a visual builder, segmentation, automation and A/B testing. Mailgun has no equivalent marketing product, and no send button at all. On the other hand, Mailgun’s free plan never expires, its API feels cleaner to many developers, and its batch sending and inbound routing are stronger. Our SendGrid review works through that product in detail. A team that needs newsletters as well as API sending should pick SendGrid. A purely developer-led team that lives in code may prefer Mailgun.

Amazon SES: the cheapest rival by a wide margin

Amazon SES is the rival every price-conscious buyer compares Mailgun against, and the maths is stark. SES charges $0.10 per 1,000 emails on its pay-as-you-go rate, so 100,000 emails cost $10, while Mailgun Foundation charges $75 for the same volume. At a million emails, SES costs $100 and Mailgun Scale costs far more once overage is counted. SES also brings dedicated IPs, Mail Manager for inbound mail and multi-region failover, all inside AWS. What SES does not offer is Mailgun’s developer experience: no batch sending of 1,000 personalised emails in one call, no inbound routing that parses mail into JSON, no template builder, and no Optimize-style deliverability suite without extra AWS tooling. Our Amazon SES review explains the new Essentials, Pro and Enterprise plans in full detail. A team with a developer should take the SES saving. A team that wants the tooling around the sending should take Mailgun.

Postmark: the transactional specialist

Owned by ActiveCampaign, Postmark is the specialist of the group. Postmark keeps transactional and promotional mail on isolated IP message streams, delivers quickly, stores 45 days of full-content logs, and gives developers 100 free emails a month. Paid plans begin at $15 a month for 10,000 emails, with Pro and Platform tiers near $16.50 and $18, plus a 125,000-email tier at $115 a month. Postmark is the best choice for a team that sends transactional email and wants the longest logs and the fastest delivery, yet it has no bulk sending scale to match Mailgun, no inbound routing as deep as Mailgun’s, and no deliverability suite to match Optimize. A team that sends nothing but receipts and alerts should give Postmark a serious look. A team that sends bulk mail as well as transactional mail should pick Mailgun.

The comparison table: cost at 100,000 emails

ToolCost at 100,000 emails a monthStarting priceBest for
MailgunBest for developers

API-first sending with batch sending, inbound routing and the Optimize deliverability suite.

$75.00
Foundation
Free 100 a day, then from $15 a monthDeveloper-led teams sending transactional and bulk emailVisit Site →Foundation from $35 a month
Amazon SESBest for lowest cost

Cheapest sending at every volume, inside AWS.

$10.00
À la carte
$0.10 per 1,000 emails, no monthly feeDevelopers who want the lowest cost per emailVisit Site →From $0.10 per 1,000 emails
Twilio SendGridBest for API plus campaigns

Only rival here with a serious API and a marketing campaign product in one account.

$34.95
Essentials
$0 for 60 days, then from $19.95 a monthProduct teams sending transactional and marketing emailVisit Site →Email API from $19.95 a month
PostmarkBest for fast transactional

Isolated message streams and 45-day full-content logs.

$115.00
125,000-email tier
Free developer tier, then from $15 a monthTeams sending only transactional emailVisit Site →Basic from $15 a month

Last checked: 16 November 2026 on each provider’s official pricing page: Mailgun, Amazon SES, SendGrid and Postmark. Features and pricing can change, so please check the provider’s site before you buy. We do not guess at features, prices or trials.

The feature matrix: what each service includes

FeatureMailgunSendGridAmazon SESPostmark
Email API and SMTP relay✓✓✓✓
Batch sending up to 1,000 emails per call✓———
Inbound email routing and parsing✓✓✓✓
Marketing campaigns and visual builder—✓——
Email template builder✓✓—✓
Real-time email validation✓✓——
Dedicated IP included on a plan✓✓✓✓
Automated dedicated IP warm-up✓✓✓✓
Deliverability suite with inbox placement tests✓✓——
Subaccounts with isolated sending queues✓———
Single sign-on✓✓——
Searchable activity beyond 7 days✓——✓
Free trial or free tier✓✓✓✓

Last checked: 16 November 2026 on each provider’s official site. ✓ means the feature is stated on the provider’s site, noting plan limits where they apply. — means not confirmed or confirmed absent on the provider’s site. Features and pricing can change, so please check the provider’s site before you buy. We do not guess at features, prices or trials.

Reading the matrix like a buyer

Read the matrix from your own needs, not from the number of ticks. Mailgun leads on developer tooling, because it is the only service here with batch sending of 1,000 emails per call, deep inbound routing and subaccounts with isolated queues. SendGrid leads on breadth, because it is the only service here that pairs a full API with a marketing campaign builder. SES leads on price and on AWS integration, yet it trails on everything a developer touches beyond sending. Postmark leads on transactional focus and log history, yet it covers the narrowest ground of the four.

A buyer that sends email from code and wants the best API should pick Mailgun. Mailgun suits the team that sends from code and wants the strongest API. SendGrid suits the team that wants one vendor for both transactional and marketing email. Anyone who needs only one of those jobs should pick the specialist and keep the saving.

Strengths and weaknesses, side by side

Where Mailgun shines in this Mailgun review

Mailgun’s greatest strength is its developer experience. The API is clean, fast and well documented, with official SDKs, interactive docs and a dashboard that makes tracing a single message easy. Batch sending of 1,000 personalised emails in one call, inbound routing that parses mail into JSON. Subaccounts with isolated queues are features no rival in this comparison matches. Scale is proven rather than promised: more than 600 billion emails a year, a Rapid Fire SLA that guarantees 99% attempted delivery of up to 15 million messages in five minutes, and throughput of up to 72 million requests an hour. The free plan is genuinely useful at 100 emails a day with no expiry. The plan ladder scales cleanly from a side project to Enterprise volumes without changing provider.

Deliverability tooling is the second strength. Optimize adds inbox placement tests, spam-trap and blocklist monitoring and bulk verification, while validation, suppression management and automated dedicated IP warm-up protect your reputation day to day. The third strength is the Sinch ecosystem: a team that later needs SMS or voice can add it from the same vendor, which matters for products that grow beyond email. For a developer-led SaaS business, that combination of API quality, scale and a clear upgrade path is hard to beat.

Where Mailgun falls short in this Mailgun review

The honest weaknesses start with price. Mailgun is not the cheapest way to send email, and the gap to Amazon SES is wide at every volume. Foundation costs $75 for 100,000 emails that SES sends for $10, and the deliverability suite costs extra on top. A buyer that only needs raw delivery ends up funding features it never touches. The second weakness is that Optimize and Inspect are separate purchases: the full toolkit costs more than the Send price suggests. A buyer who wants inbox placement tests must budget for them. The third weakness is short log retention on the cheaper plans: one day on the free and Basic plans, five days on Foundation, while Postmark includes 45 days.

Support is the fourth weakness worth naming plainly. Lower plans get ticket support only, and phone and chat support arrive with Scale. Fast, personal help only comes with a higher plan. The fifth is that Mailgun has no send button and no marketing campaign builder: a marketer without a developer cannot design and send a newsletter alone. The sixth is that Mailgun is not a cold email tool and never pretends to be: no database, no prospecting sequences, no LinkedIn and no cold warm-up pool. None of these weaknesses makes Mailgun a bad product. They make it a product with a clear best buyer. A buyer outside that profile should pick a rival instead.

Getting started: a sensible first 30 days

The first week is setup week. Create your Mailgun account, add a domain, and publish the SPF, DKIM and DMARC records that prove Mailgun sends on your behalf. Create a restricted API key with sending access only, turn on two-factor authentication, and send your first test emails from the sandbox domain to your own addresses at Gmail, Outlook and Yahoo. Check where each message lands, open the logs, and confirm the delivery events match what you sent. When a test message lands in spam, fix authentication before sending more, since early reputation damage takes far longer to repair than to avoid.

The second week: your first real mail

In the second week, move your first real transactional mail onto Mailgun. Start with one message type, such as password resets or order confirmations, and build a template for it. Connect the event webhook to your application so bounces and complaints flow back automatically, and set up suppression handling so bounced addresses never receive mail twice. Watch the analytics daily for the first few days, and check the bounce classifications for anything unexpected. Keep your old sending method running in parallel until Mailgun proves itself, then switch the rest over one message type at a time.

Week three and four: volume, monitoring and the buy decision

In weeks three and four, scale up and decide whether to pay, using the prices in this Mailgun review as your guide. Move the rest of your transactional mail across, then try batch sending for a bulk announcement to a small segment of your list before you mail everyone. Run a bulk validation on the list, check inbox placement with Optimize if you bought it, and review engagement by mailbox provider. At the end of the month, compare your actual volume against the plan tiers: if you regularly exceed Basic, upgrade rather than paying overages. If you need a dedicated IP, move to the volume where one is included and let the automated warm-up run its course. By day 30 you will know whether Mailgun earns its price for your team. You will still have the free plan to fall back on if it does not.

Frequently asked questions in this Mailgun review

How much does Mailgun cost per month?

In short, Mailgun’s Send plans start with a free plan at $0 for 100 emails a day, then Basic costs $15 a month for 10,000 emails, Foundation costs $35 a month for 50,000 emails or $75 a month for 100,000 emails. Scale costs $90 a month for 100,000 emails and rises with volume. Foundation and Scale include the first month free. Optimize and Inspect are priced separately from Send. We checked all of these figures on Mailgun’s official pricing page on 16 November 2026.

Is Mailgun free?

In fact, Mailgun is free forever at 100 emails a day, with no credit card required, on a plan that includes one custom sending domain, one API key, tracking and analytics, and one day of log retention. That free plan never expires, unlike a trial. For production sending above 100 emails a day, the cheapest paid route is Basic at $15 a month for 10,000 emails. Paid plans also offer a free first month on Foundation and Scale.

What is the difference between Mailgun Send, Optimize and Inspect?

Overall, Mailgun Send is the delivery product that sends transactional and bulk email through an API or SMTP. It charges by emails sent. Mailgun Optimize is the deliverability product that adds inbox placement tests, spam-trap and blocklist monitoring, bulk email verification and deliverability services, priced separately. Mailgun Inspect is the testing product that previews an email before you send it, also priced separately. You buy Send on its own, and you add Optimize or Inspect only if you need them.

Is Mailgun good for cold email?

In short, Mailgun is not a good tool for cold email, and using it that way risks your account. Sinch expects permission-based sending, and high bounce or complaint rates can get an account suspended. Mailgun has no B2B contact database, no prospecting sequences, no LinkedIn automation and no inbox rotation for cold sending. It is built for mail people expect: password resets, receipts, notifications and bulk mail to opted-in subscribers. A team planning cold outreach should start with our best cold email software roundup, while our Instantly review covers a tool designed for that job.

Does Mailgun include a dedicated IP?

Yes, a dedicated IP is included with Foundation once you reach 100,000 emails a month, and with Scale plans, which also offer dedicated IP pools. Lower volumes send from shared IPs, which means your reputation is partly shared with other senders. Additional dedicated IPs cost $59 per IP per month. A dedicated IP earns its keep once your volume holds steady and your list stays clean, since your sender reputation then rests on your own sending alone. Wait for the automated warm-up to finish before you send at full volume.

Which is cheaper, Mailgun or Amazon SES?

Overall, this Mailgun review finds Amazon SES cheaper than Mailgun at every volume on sending alone. At 100,000 emails a month, SES costs $10 on its pay-as-you-go rate, while Mailgun Foundation costs $75 and Mailgun Scale costs $90. At a million emails a month, SES costs $100, while Mailgun’s Scale tiers cost several times more. Mailgun charges more because it includes the product around the sending: batch sending, inbound routing, templates, validation, subaccounts and the Optimize deliverability suite. A developer-led team should pocket the SES saving, while a team that uses Mailgun’s tooling should take Mailgun and use the features it pays for.

The verdict in this Mailgun review

Verdict: Mailgun is the best developer-first email API for teams that send transactional and bulk email from code

Best for: developers, SaaS products and growing businesses that want a fast, API-first way to send transactional and bulk email, with batch sending, inbound routing, real deliverability tools and room to scale past 2.5 million emails a month.

Mailgun does the developer’s job better than any service in this comparison, and it does it well. The API is clean, fast and well documented. Batch sending, inbound routing, event webhooks, templates and validation give a team everything it needs to send reliably and to see what happened afterwards. Optimize adds the inbox placement tests, spam-trap and blocklist monitoring that SES simply does not offer. Behind it all sits infrastructure that moves more than 600 billion emails a year with a Rapid Fire delivery SLA. A team that sends email from code will not find a friendlier home for it.

The honest price is higher than the cheapest rival, because Mailgun sells a product rather than raw sending. Amazon SES sends the same 100,000 emails for $10 against Mailgun’s $75, and that gap never closes.

A team with a developer and a clean list should take the saving. A team that values the API, the routing, the dedicated IP pools on Scale and the support of a large vendor should take Mailgun and use the features it pays for. Start with the free plan, send your real transactional mail through it, and let the delivery numbers decide. We have not tested Mailgun hands-on, so this verdict rests on Mailgun’s official pricing and feature pages checked on 16 November 2026, not on our own sending. On that evidence, Mailgun is the safe, capable developer’s choice: not the cheapest, not the broadest, and the easiest serious choice for a team that sends email from code.

Visit Mailgun →

Keep reading

Best for developer-first email sending: MailgunFree 100 emails a day · Basic from $15 a month Visit Site →

Comments

2 responses to “Mailgun Review 2026”

  1. […] Visit Postmark →Compare with Mailgun […]

  2. […] far easier. Batch sending packs up to 1,000 personalised emails into a single API call. Our Mailgun review covers the platform in full […]

Leave a Reply

Your email address will not be published. Required fields are marked *

OutreachCompare

Compare B2B email outreach tools — cold email, deliverability, data and verification, tested and ranked for startups, agencies and enterprises.

Compare B2B email outreach tools — cold email, deliverability, data and verification, tested and ranked for startups, agencies and enterprises.

© 2026 OutreachCompare. All rights reserved.

Designed with WordPress