How to Warm Up a New Email Domain 2026

A new domain is a stranger to every inbox. Warmup is how it earns a reputation.

You bought a fresh sending domain, set up three mailboxes, wrote a good first email, and sent it to 200 prospects on day one. By day three, almost everything is landing in spam. Nothing about the email was wrong. The domain was simply too new, too loud, and too unknown for Gmail and Outlook to trust. Mailbox providers treat a brand-new domain the way you would treat a stranger who knocks on your door and immediately asks for money: with suspicion. This how to warm up email domain guide shows you the patient way in. First comes the setup to finish, then the 2 to 4 week schedule, day by day. After that come the tools that automate the work, the numbers that tell you when you are ready, and the recovery steps if things stall.

Visit Instantly →See Warmforge →Try QuickMail →

Prices and features in this guide were checked 16 November 2026. Features and pricing can change, so please check the provider’s site before you buy.

Quick Answer

Warm up a new email domain for 2 to 4 weeks before you send cold email. Start at 5 to 10 warmup emails per mailbox per day, and ramp slowly to 25 to 30 real sends per mailbox per day. Set up a separate sending domain with SPF, DKIM and DMARC first. Let the domain age 7 to 14 days. Then let a warmup tool exchange real-looking emails with a pool of real inboxes that open, reply and rescue your messages from spam. You are ready to send when your inbox placement is healthy, your spam rate is under 0.1%, and your Warmforge Heat Score is 85 or higher.

Warmup is not a trick, and it is not optional. It is the normal, widely used way every serious cold email sender introduces a new domain to the mailbox providers. A domain that is warmed properly earns the inbox. A domain that is blasted from day one earns the spam folder, and sometimes earns it permanently.

Contents

How to warm up email domain: the patient path to the inbox

At its simplest, warming up a new email domain means sending a small number of emails each day. Increase the volume slowly over two to four weeks, so Gmail, Outlook and Yahoo learn that your domain is a real sender with real readers. The emails go to a network of real inboxes. Those inboxes open them, reply to them, mark them as important, and rescue them from the spam folder if they land there. Every open, reply and rescue is a positive signal, and those signals build the reputation that decides whether your first real campaign lands in the inbox or in spam.

Cold email is normal, widely used business practice, and warmup is the quiet, unglamorous part of it that makes everything else work. For example, our Cold Email for Beginners guide covers the foundations, and our guide to setting up a sending domain covers the technical setup. This guide takes the next step: it turns that setup into a reputation, week by week, with a schedule you can follow, tools you can compare, and numbers you can check.

How to warm up email domain: how this guide is organised

This guide follows the life of a new domain. Firstly, it starts with what warmup is and why a cold domain lands in spam, then walks through the setup checklist that must be finished before warmup begins. After that comes the schedule itself, day by day and week by week. Then come the eight tools compared on price and features, the signals that tell you warmup is working, and the recovery steps if it stalls. Finally, the guide covers ongoing warmup and a decision framework that matches the approach to your budget. By the end, you will know exactly what to do tomorrow morning.

What warmup is, and why a cold domain lands in spam

A new domain has no reputation at all. That is the whole problem, and it is easy to misunderstand. Mailbox providers do not know whether your domain belongs to a real business or to a spammer who registered it an hour ago, because from the outside the two look identical. Both have fresh DNS records, both have empty sending histories, and both want to send email to strangers. The provider has to decide, and it decides cautiously, because the cost of letting a spammer through is angry users, while the cost of delaying a real sender is small. So it watches. It watches how much you send, who opens it, who replies, who marks it as spam, and whether your sending looks like a human or like a machine.

Warmup is how you pass that test. For example, a warmed domain sends a few emails a day at first, and those emails are opened and replied to, because the warmup pool is made of real inboxes whose owners open and reply on purpose. In addition, the provider sees a new sender whose mail is welcomed, and it raises the domain’s reputation a little. The next day you send a few more, they are welcomed again, and the reputation rises again. After two to four weeks of this, the provider has enough evidence to trust you with real volume. Skip the process and send 200 emails on day one, and the provider sees a brand-new domain blasting strangers, which is exactly what spammers do, so it sends you to spam. The email was fine. The introduction was not.

How to warm up email domain: domain reputation, in plain words

Domain reputation is the score mailbox providers keep for your sending domain, built from everything they have seen you do. In fact, a high reputation means your mail reaches the inbox. A low reputation means it reaches spam, or it is rejected outright. The reputation is built from open rates, reply rates, spam complaints, bounce rates, and the simple fact of how long the domain has been sending sensibly. A domain that has sent small, welcomed volumes for a month has a reputation. A domain that registered yesterday and sent 500 emails this morning does not, and no amount of good writing can fix that on day one.

There is a second reputation that matters too: the reputation of the individual mailbox. Similarly, each mailbox on your domain, like alex@getyourcompany.com, builds its own history alongside the domain’s. That is why warmup tools warm each mailbox separately, and why you should warm every mailbox you plan to send from, not just one of them. A warmed domain with a cold mailbox still sends cold mail. Warm both, and the whole setup earns trust together.

How to warm up email domain: warmup vs IP warmup

You may also hear the phrase IP warmup, and it is worth knowing the difference. IP warmup is about the sending server’s address: when a new dedicated IP starts sending, its reputation must also be built gradually. Most cold email tools today send from shared IP pools that are already warm, so the IP is not your problem. Your domain is the only variable that counts, because it is the one thing that is brand new. If you run your own servers, as Do You Mail customers do, the IP matters too, and the same slow-ramp logic applies to it. For most senders, though, domain warmup is the job, and IP warmup is something the tool has already handled.

How to warm up email domain: what warmup cannot fix

Warmup is powerful, and it is not magic. For example, it cannot rescue a domain that has already been burned by weeks of spam complaints, and it cannot make a bad list deliverable. If your list bounces at 6%, warmup will not save you, because bounced emails cannot open or reply, and the provider reads the bounces as evidence that you send to people who do not want your mail. Similarly, warmup cannot fix missing authentication, a domain with no SPF, DKIM or DMARC will struggle whatever you do, and it cannot fix content that reads like spam. Warmup builds the reputation. The list, the authentication and the writing have to be sound first, and the setup section below makes sure they are.

Before warmup starts: the setup checklist

Warmup works only when the groundwork is done, and the groundwork takes an afternoon. Moreover, rushing into warmup with a half-finished setup is the most common beginner mistake, because warmup on top of broken authentication builds a reputation for a domain that still looks broken. Do these six steps first, in order, and warmup will have something solid to build on.

How to warm up email domain: buy a separate sending domain

Never send cold email from your main company domain. Buy a separate sending domain, a close cousin of your main one, like getyourcompany.com if your main domain is yourcompany.com, or yourcompanyemail.com. The reason is simple and serious: if the sending domain’s reputation takes a hit, your main domain, the one your customers email, your invoices come from, and your team relies on, stays safe. In fact, a sending domain costs about $14 a year, which is the cheapest insurance in cold email. Mailforge sells .com domains at $14 a year, and most registrars charge a similar figure. Register it, then leave it alone for 7 to 14 days before you send anything from it, because a domain that has existed for two weeks looks far more real to a mailbox provider than one registered yesterday.

While the domain ages, set up two or three mailboxes on it, not one. Three mailboxes let you spread your daily volume, so each mailbox sends 25 to 30 emails a day instead of one mailbox sending 90, and that spread looks far more human. Connect at least two inboxes per domain, and warm every mailbox you plan to send from. Our sending domain guide walks through the mailbox setup in detail, and the same rule applies here: spread the load, warm them all.

Video: How to Warm Up a New Domain Before Cold Email (4 Steps) by CleanSignups on YouTube. This video is the creator’s property, embedded via YouTube for education. OutreachCompare is not affiliated with CleanSignups and does not claim ownership of this video.

How to warm up email domain: authenticate with SPF, DKIM and DMARC

Authentication is the proof that your domain really sent the email. Firstly, SPF lists the servers allowed to send for your domain. DKIM adds a cryptographic signature that proves the email was not altered in transit. DMARC tells mailbox providers what to do when an email fails those checks, and it gives you reports about who is sending as you. Set all three up before warmup begins, and test them with a free checker until they all pass. Google and Yahoo made SPF, DKIM and DMARC effectively required for bulk senders in February 2024, and Gmail tightened enforcement further in November 2025, issuing temporary and permanent rejections for senders who do not comply. A domain without them will struggle in warmup, and it will struggle worse in production.

Set DMARC to p=none while you warm up, so you can read the reports without mail being rejected, and move to p=quarantine or p=reject once the reports show everything passing. Check the records again after a week, because DNS changes can take time to spread, and a record that looks right in your registrar may not yet be visible to Gmail. The authentication step is boring, and it is the step that protects everything else.

How to warm up email domain: add a custom tracking domain

Most sending tools track opens and clicks by rewriting your links to go through a shared tracking domain. That shared domain is used by thousands of senders, including careless ones, and its reputation becomes your reputation. A custom tracking domain is a subdomain of your own sending domain, like track.getyourcompany.com, that only you use, so your tracking links carry your reputation and nobody else’s. Set it up before warmup, and make sure it has its own SSL certificate, because an unsecured tracking link is a spam signal on its own. In fact, Instantly, Smartlead and Lemlist all support custom tracking domains, and the setup takes about ten minutes.

How to warm up email domain: connect Google Postmaster Tools

Google Postmaster Tools is Google’s free dashboard for senders. It shows you what Gmail actually thinks of your domain: your spam rate, your domain reputation, your authentication results, and whether Gmail is throttling you. Connect it before warmup, and check it every few days while you warm up. It takes a few days to show data, so connect it early. The spam rate it reports is the number that matters most. Aim for under 0.1%, and never let it reach 0.3%, because that level puts the domain itself at risk. Sign up at Google Postmaster Tools, verify your domain, and leave the tab open. In sum, it is the closest thing to a direct line to Gmail that a sender gets.

How to warm up email domain: the pre-warmup checklist

StepWhat to doDone when
1. Separate domainBuy a sending domain close to your main oneDomain registered, about $14 a year
2. Age the domainWait 7 to 14 days before sending anythingTwo weeks have passed since registration
3. MailboxesSet up 2 to 3 mailboxes on the sending domainAll mailboxes connected and sending
4. AuthenticateSPF, DKIM and DMARC all set up and passingFree checker shows all three green
5. Tracking domainCustom tracking subdomain with SSLLinks rewrite to your own subdomain
6. Postmaster ToolsConnect Google Postmaster ToolsDomain verified, dashboard live

Last checked: 16 November 2026. The 7 to 14 day ageing rule and the pre-warmup checklist follow the 2026 warmup playbook published by Prospeo, linked in this guide, and the setup guidance in our sending domain guide. Mailforge sells .com domains at $14 a year, verified on mailforge.ai/pricing 16 November 2026. Features and pricing can change, so please check the provider’s site before you buy.

The 2 to 4 week warmup schedule, day by day

Here is the schedule itself, and it is deliberately slow. In addition, the numbers below are per mailbox, per day, and they assume you have already finished the setup checklist above. Warmup emails are the automated exchanges with the warmup pool. Real sends are emails to real prospects. The two are different, and the schedule keeps them separate until the domain is ready. If anything in the signals section goes wrong during a week, stay on that week for another few days instead of pushing on. A week spent repeating is cheap. A domain burned by rushing is not.

How to warm up email domain: four stacks of email envelopes growing taller from left to right, with a rising amber arrow above them and small calendar grids over each stack
The warmup schedule in this how to warm up email domain guide: four stacks of envelopes growing taller week by week, with a rising arrow above them. Each stack is a week, and each week sends more than the last.

How to warm up email domain: the four-week schedule

WeekWarmup emails per mailbox per dayReal sends per mailbox per dayWhat to do
Week 1: Days 1 to 75, ramping to 25None: warmup onlyTurn warmup on, watch placement daily
Week 2: Days 8 to 1425, ramping to 50None, or 5 to 10 to engaged contactsAdd a second mailbox if you have one
Week 3: Days 15 to 2150, ramping to 7525 to 30 to real prospectsStart real sending, keep volume low
Week 4: Days 22 to 2875, ramping to 10025 to 30, rising towards 40 maxCheck Postmaster Tools and Heat Score

Last checked: 16 November 2026. The schedule above follows Instantly’s 2026 warmup guidance, updated October 2026. Start at 5 to 10 warmup emails a day. Warm for at least 2 weeks before campaigns, and reach full campaign volume at 4 to 6 weeks. Send 25 to 30 emails per mailbox per day once placement is healthy, with 40 as the maximum. Prospeo’s 2026 playbook uses the same shape: 5 a day ramping to 25 by day seven, with a 2 to 4 week ramp and gating metrics checked daily. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: week one, building trust

Week one is warmup only, and that is the hardest part for a beginner to accept, because nothing is being sold. Firstly, days 1 to 3 run at 5 to 10 warmup emails per mailbox per day, and the only job is to watch where they land. If warmup emails are landing in spam, the warmup pool rescues them, marks them as not spam, and the provider learns. By day seven, the volume ramps to 25 warmup emails a day, and the domain has a week of clean, welcomed sending behind it. Do not send a single real email in week one, however tempting it is. A real send to a cold prospect in week one is a send from a domain with no reputation, and it teaches the provider nothing good.

Use week one to check the basics again. Are SPF, DKIM and DMARC still passing? Is the custom tracking domain working? Is Google Postmaster Tools showing data yet? If a warmup email bounces, find out why before the volume rises, because a bounce in week one is a setup problem, not a warmup problem. Fix it now, while the volume is tiny and the cost of a mistake is nothing.

How to warm up email domain: week two, adding volume

Week two doubles the warmup volume, from 25 to 50 warmup emails per mailbox per day, and it is the week to add a second mailbox if you have one. The second mailbox starts its own warmup from the beginning, at 5 to 10 a day, while the first mailbox continues its ramp. That stagger is deliberate: it means your mailboxes reach full volume on different days, and your total volume grows smoothly instead of jumping. If you have a third mailbox, add it in week three, the same way.

At the end of week two, you may send a handful of real emails, 5 to 10 a day, to people who already know you: colleagues, existing customers, or contacts who have asked to hear from you. Moreover, these are guaranteed engagers, people who will open and reply, and their engagement is exactly the signal the provider wants to see. Do not send to a cold list in week two. The domain is warmer, but it is not warm yet, and a cold list is the fastest way to cool it down again.

How to warm up email domain: week three, the first real sends

Week three is when the work starts paying. Meanwhile, warmup continues at 50 to 75 emails a day, and real sending begins at 25 to 30 emails per mailbox per day to real prospects. Keep the first emails short, 60 to 120 words, plain text, no tracking pixels, no images, and no links beyond one. Our guide to writing cold emails explains why: a short, plain email looks like a message from a person, and a message from a person is what the provider wants to see. Send in the recipient’s timezone, on Tuesday, Wednesday or Thursday, and watch the bounce rate like a hawk. Keep it under 2%, and stop if it climbs above that.

Week three is also when you verify your list, if you have not already. Our guide to building a cold email list covers verification in detail, and the rule here is simple: never send to an unverified list during warmup, because a single bad send can set you back weeks. Verify first, send second, and check the bounce rate per mailbox every morning.

How to warm up email domain: week four, reaching full volume

Week four takes the warmup volume to 75 to 100 a day and the real volume towards 40 per mailbox per day, which is the maximum we recommend for any single mailbox. By now the domain has four weeks of clean sending behind it, and the mailbox providers have a real picture of who you are. Check Google Postmaster Tools: your spam rate should be under 0.1%, and your domain reputation should read high. Check your warmup tool’s health score too, and if you use Warmforge, your Heat Score should be 85 or higher before you call the domain ready. If any of those numbers is off, stay at week three volumes for another week. There is no prize for finishing early, and there is a real cost to finishing too soon.

After week four, full campaign volume takes another two weeks to reach, according to Instantly’s 2026 benchmark report, which puts the full ramp at 4 to 6 weeks. That does not mean you wait six weeks to send. It means you keep ramping gently after week four, adding a few sends a day, adding warmed mailboxes and warmed domains as you grow, instead of jumping to full volume overnight. The ramp is the habit, not the event.

Warmup tools compared: the eight options

Eight tools cover almost every warmup job in this guide. They split into three kinds: built-in warmup inside a sequencer, standalone warmup services, and infrastructure that does not warm up at all. Built-in warmup runs inside the sending tool itself. Standalone services warm mailboxes for any tool you use. Infrastructure gives you the servers and leaves the warmup to you. The tables below compare them on price, on warmup features, and on the plan details that decide what you actually get.

How to warm up email domain: the eight tools at a glance

ToolPrice fromWarmup includedBest for
Instantly$47/mo; $37.60 annualYes, unlimited, all plansBuilt-in warmup at scale
Smartlead$39/moYes, unlimited AI warmupAgency warmup at volume
Lemlist$69/mo; $55 annualYes, lemwarm includedMultichannel warmup
Woodpecker$35/mo; $23.33 annualYes, 2 warm-ups at entryAgency warmup per client
Warmforge$9/slot/mo annualYes, standalone warmupWarmup with a Heat Score
QuickMail$49/moYes, free AutoWarmerFree warmup on every plan
Inframail$147/moOnly on DFY $797/moDone-for-you setup
Do You Mail$39/server/moNo warmup poolInfrastructure only

Last checked: 16 November 2026. Instantly Growth is $47 a month, or $37.60 on annual billing. Hypergrowth is $107, or $85.58 annual. Its plan card says 125,000 emails a month while its own comparison table says 100,000, so check the site for the current limit. Woodpecker’s entry price is $35 a month, or $23.33 on annual billing, for 500 contacted prospects, 8,000 emails and 2 warm-ups, then $67 for 2,000 prospects, $99 for 4,000, $159 for 8,000, $188 for 10,000 and $262 for 15,000. Our Woodpecker Review still shows the older figures, so use the figures here.

Last checked: 16 November 2026. Inframail’s warmup is included only on its FREE DFY plan at $797 a month for a minimum of 3 months; its Unlimited plan at $147 and Agency Pack at $387 do not include warmup. Older pages still showing $129 and $327 for Inframail are out of date. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: warmup features, first four tools

ToolWarmup typeWarmup poolSpam rescueHealth or placement test
InstantlyAutomated, unlimited4.2M+ accountsYes, automatedInbox placement tests
SmartleadUnlimited AI warmupCheck the siteYes, spam rescuesCheck the site
Lemlistlemwarm, automatedCheck the siteCheck the siteCheck the site
WoodpeckerAutomated warmupCheck the siteCheck the siteBounce shield

Last checked: 16 November 2026. Instantly’s unlimited automated warmup across a 4.2 million account pool and its inbox placement tests are stated on its official site. Smartlead’s unlimited AI warmup with spam rescues is stated on its official site. Lemlist’s lemwarm and inbox rotation, and Woodpecker’s automated warmup, inbox rotation, adaptive sending and bounce shield, come from the verified profiles Matthew supplied. “Check the site” means we could not verify that detail on the official site today, not that the tool lacks it. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: warmup features, next four tools

ToolWarmup typeWarmup poolSpam rescueHealth or placement test
WarmforgeStandalone warmup slotsCheck the siteCheck the siteHeat Score 0 to 100
QuickMailFree AutoWarmer via MailFlowCheck the siteCheck the siteCheck the site
InframailDFY warmup onlyCheck the siteCheck the siteCheck the site
Do You MailNone: no warmup poolNoneNoneNone

Last checked: 16 November 2026. Warmforge warmup is $12 a month billed monthly, $10 billed quarterly, or $9 billed annually per slot, with 1 free slot on signup and no free trial. Its Heat Score runs 0 to 100, and Warmforge says to start sending at 85 or higher.

Last checked: 16 November 2026. QuickMail’s AutoWarmer is free on every plan through MailFlow, and its plans are $49, $99 and $299 a month with unlimited senders, LinkedIn accounts and users on all plans, a 14-day trial, and no annual discount published. Do You Mail is infrastructure with no warmup pool: dedicated servers, automated SPF, DKIM and DMARC, unlimited inboxes and domains, and no warmup, sequences, lead data or reply inbox. Its homepage also shows $40 a month in one scaling example, against the $39 a month server price, so check the site. Features and pricing can change, so please check the provider’s site before you buy.

Video: How to Set Up Instantly AI Email Warm Up by Patrick Walsh on YouTube. This video is the creator’s property, embedded via YouTube for education. OutreachCompare is not affiliated with Patrick Walsh and does not claim ownership of this video.

How to warm up email domain: what each tool’s warmup looks like

Instantly’s warmup is the most complete built-in option in this guide. Firstly, it is unlimited and automated on every plan. Its pool holds more than 4.2 million accounts, and it emulates human reads and runs inbox placement tests. It also requires at least 2 weeks of warmup plus a health score above 90% before an account can join a campaign. That gating is a feature, not a limitation: it stops you from sending before the domain is ready. The video above walks through the setup, and our Instantly Review covers the tool in full, from $47 a month on Growth.

Smartlead’s warmup is unlimited AI warmup with spam rescues, built for agencies that warm dozens of mailboxes at once. Its Base plan is $39 a month. Pro is $94, Unlimited Smart is $174, and Prime is $379, with annual billing saving 17%. Smartlead also sells SmartDelivery from $49 a month and SmartServers from $39 a server a month, which are separate deliverability products, so check which one you need before you pay. Our Smartlead Review covers the full tool.

Lemlist’s lemwarm is the warmup inside a multichannel sequencer, with inbox rotation that spreads sends across your mailboxes automatically. For example, Email is $69 a month, or $55 on annual billing, and Multichannel is $109 a user a month, or $87 annual. Woodpecker’s warmup is automated too, with inbox rotation, adaptive sending and a bounce shield that pauses sending when bounces climb, and its new pricing is charged by contacted prospects on a slider, from $35 a month for 500 prospects. Both are strong choices when the warmup and the sequences live in the same tool, and both are covered in our Lemlist Review and Woodpecker Review.

How to warm up email domain: standalone warmup and the infrastructure trap

Warmforge is the standalone specialist in this guide. Firstly, it warms mailboxes for any sending tool. The price is per slot: $12 monthly, $10 quarterly or $9 annually, with one free slot on signup. It also gives you the clearest readiness number in the business: a Heat Score from 0 to 100, with 85 as the line for sending. Its Placement Pro plan is $32.50 a month on annual billing, or $39 monthly, and its Growth plan is $140.80 annual, or $169 monthly. There is no free trial, and unlimited Warmforge slots are free on every Salesforge plan. Our Warmforge and Mailforge Review covers the pair in full.

QuickMail’s AutoWarmer is the free option, included on every plan through MailFlow, and its plans are $49, $99 and $299 a month with unlimited senders, LinkedIn accounts and users, a 14-day trial, and no annual discount published. Inframail is the opposite. Warmup is included only on its done-for-you plan at $797 a month for a minimum of 3 months. Its Unlimited plan at $147 and Agency Pack at $387 do not include warmup at all, so check the plan before you buy. Do You Mail has no warmup pool at all, which is stated plainly on its site: it sells dedicated servers and automated DNS, and the warmup is your job, with a separate tool. That is not a flaw. It is a different product, and our Do You Mail Review explains the difference.

How to warm up email domain: the honest pros and cons

No tool in this guide is the best at everything, and the honest trade-offs are worth stating plainly. Instantly is the strongest built-in warmup at scale, yet it shows no free trial on its pricing page, so you pay before you can test it properly. Smartlead is the strongest for agencies, yet its most useful deliverability add-ons are separate paid products, and the pricing needs careful reading. Lemlist is the strongest for multichannel senders, yet it is the priciest starting point here at $69 a month, and it has no free plan.

Woodpecker is the strongest for agency clients that want condition-based logic, yet its new per-prospect pricing makes large lists expensive, and a warmup that needs volume can push you into a higher tier. Warmforge is the clearest standalone warmup, yet it is a second subscription on top of your sequencer, and it has no free trial. QuickMail is the cheapest honest start with free warmup, yet its warmup details are not published in depth, so ask before you rely on them. Inframail’s done-for-you warmup is the most hands-off, yet $797 a month for a minimum of 3 months is a serious commitment. Do You Mail is the cheapest infrastructure, yet it leaves warmup entirely to you. Choose the warmup whose strength covers your weakest point, not the one with the longest feature list, and confirm the plan details before you pay.

How to tell warmup is working

Warmup is not a feeling. It is a set of numbers, and you should check them every few days while you warm up. The four numbers below tell you almost everything you need to know, and they are the same numbers that decide when you are ready to send. A domain that passes all four is ready. A domain that fails any one of them is not, however many weeks have passed.

How to warm up email domain: a circular gauge dial with a needle pointing into the green zone, a small teal envelope in the centre, and a green shield with a checkmark at the bottom right
The Heat Score in this how to warm up email domain guide: a gauge with its needle in the green zone, an envelope in the centre, and a green shield with a checkmark. The needle is the number that decides when you send.

How to warm up email domain: the four signals to watch

SignalHealthyWhere to check itWhat it tells you
Heat Score85 or higherWarmforge dashboardReadiness to send, 0 to 100
Inbox placementPrimary inbox, not spamWarmup tool placement testsWhere your mail actually lands
Spam rateUnder 0.1%, never 0.3%Google Postmaster ToolsWhether Gmail trusts you
Bounce rateUnder 2%Your sending toolList quality and setup health

Last checked: 16 November 2026. Warmforge’s Heat Score runs 0 to 100, and Warmforge says to start sending at 85 or higher. Instantly requires a health score above 90% before an account can join a campaign, according to its 2026 warmup guidance. Benchmarks as used across this site: bounce under 2%, spam aim under 0.1% and never 0.3%. Our Deliverability Guide covers the full sending setup that sits behind these numbers. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: reading the Heat Score

Warmforge’s Heat Score is the simplest readiness number in this guide. It is one number, from 0 to 100, and the line is clear: send at 85 or higher. In fact, the score is built from how your warmup emails are treated: whether they land in the inbox, whether they are opened, whether they are replied to, and whether they are rescued from spam. A score in the 90s means the mailbox providers trust the mailbox. In the 60s, the mailbox providers do not trust it yet. If the score falls week on week, something changed, and the recovery section below tells you what to do about it.

Instantly’s health score works the same way, with a higher bar: above 90% before an account can join a campaign. If your tool does not give you a single score, use the other three signals instead. Inbox placement is the most direct of them: send a placement test to Gmail, Outlook and Yahoo seed inboxes, and check where the email lands. Primary inbox is ready. Promotions is a warning. Spam is not ready, however many weeks have passed.

How to warm up email domain: the spam rate is the number that matters

Google Postmaster Tools reports your spam rate. That is the share of your mail that Gmail users mark as spam, and it is the number with the hardest limit in this guide. Aim for under 0.1%. Never let it reach 0.3%. At 0.3%, Gmail treats your domain as a problem, and the damage is hard to undo. During warmup, your spam rate should be near zero, because warmup emails go to a pool that wants them. If your spam rate climbs during warmup, something is wrong with the setup, not with the schedule, and you should stop and investigate before the volume rises.

Bounce rate is the fourth signal, and it is the one that most often ruins a warmup without anyone noticing. In fact, a bounce rate under 2% is healthy. Above 2%, the list or the setup is the problem, and warmup cannot fix either. Check the bounce rate per mailbox every morning, and if one mailbox bounces far more than the others, pause that mailbox and find out why before you send from it again. A warmup that ignores bounces is a warmup that builds a reputation on bad data.

What to do if warmup stalls or the domain gets flagged

Sometimes warmup stalls. The Heat Score stops rising, placement tests start landing in spam, or the spam rate climbs for no obvious reason. That is not the end of the domain, and it is not a reason to panic. It is a signal, and the steps below work through it in order, from the cheapest fix to the hardest decision. Most stalls are fixed in the first three steps.

How to warm up email domain: a hand lifting a bright amber envelope out of a dark spam folder full of envelopes, with an amber warning triangle above and a small first-aid cross badge
Recovery in this how to warm up email domain guide: a hand lifting an envelope out of a dark spam folder, with a warning triangle above. The rescue is the warmup pool doing its job, and the fix is usually in the setup.

How to warm up email domain: the recovery steps, in order

StepWhat to doHow long
1. Pause real sendingStop all cold email from the domain at onceImmediately
2. Cut warmup volume in halfHalve the daily warmup sends per mailboxSame day
3. Re-check authenticationSPF, DKIM and DMARC all passing againSame day
4. Check the listRe-verify, remove bounces and spam traps1 to 2 days
5. Keep warming, slowlyWarmup only, low volume, for 1 to 2 weeks1 to 2 weeks
6. Re-test placementPlacement tests back in the primary inboxAfter 2 weeks
7. Retire the domainOnly if nothing above works after a monthLast resort

Last checked: 16 November 2026. The recovery steps above are our editorial summary of the warmup guidance published by Instantly and Prospeo, linked in this guide, and the deliverability practice in our Deliverability Guide. A domain costs about $14 a year to replace, so retiring a burned domain is cheap compared with months of spam-folder sending. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: the three most common causes

The first cause is volume that rose too fast. To fix it, follow step two: halve the warmup volume, stay there for a week, and ramp again more slowly. The second cause is authentication that broke quietly, often because a DNS record changed or a new mailbox was added without its DKIM key. To fix that, follow step three: re-check SPF, DKIM and DMARC with a free checker, and fix whatever fails before you send another email. The third cause is the list: a batch of unverified addresses, a bought list, or a list that has sat unused for a year. To fix the list, follow step four: re-verify the whole list, remove every bounce and every risky address, and never send to an unverified list again.

There is a fourth cause worth naming, because it is the one beginners miss: content that reads like spam. All-caps subject lines, too many links, too many images, and words like free, guaranteed and act now all push a warmed domain back towards spam. If placement is poor and the setup is clean, simplify the email: plain text, one link, no images, 60 to 120 words. Our guide to writing cold emails shows what a clean first email looks like, and a clean email is the fastest way to test whether the problem is the content or the domain.

How to warm up email domain: when to retire a domain

Retiring a domain is the last resort, and it is worth knowing when it applies. If you have paused real sending, halved the volume, fixed the authentication, cleaned the list, warmed for another month, and the placement tests still land in spam, the domain’s reputation is burned, and the honest move is to start again. A sending domain costs about $14 a year, and a fresh domain with a proper warmup will reach the inbox in four weeks. A burned domain that you keep nursing will cost you months of spam-folder sends, and every one of those sends is a prospect you never reached.

Retire the domain cleanly: stop sending from it entirely, do not reuse its mailboxes on a new domain, and do not copy the list that burned it without re-verifying every address. Then buy a new sending domain, age it for 7 to 14 days, and follow the schedule in this guide from day one. The second warmup is always faster than the first, because you already know the steps, and the domain you retire is a lesson, not a failure. Every sender who has sent at volume has retired a domain. The good ones do it early, and move on.

Ongoing warmup: why you keep warming while you send

Warmup does not end when your first campaign starts. In fact, that is the sentence most guides leave out, and it is the one that protects your reputation for the long term. A domain that stops warming and only sends cold email slowly loses the positive signals that built its reputation, because every send is now to a stranger, and strangers open and reply less than the warmup pool does. The provider notices the change, and the reputation drifts down. Keep a slice of your daily volume on warmup, and the reputation keeps compounding instead.

How to warm up email domain: the 20 to 30 percent rule

Instantly’s 2026 guidance puts the number plainly: keep 20 to 30 percent of your daily volume on warmup even after campaigns launch. For example, if a mailbox sends 30 real emails a day, it should also send 6 to 9 warmup emails a day. Those warmup emails are opened, replied to and rescued, and they keep the positive signals flowing alongside the real sends. The cost is tiny, a few emails a day, and the benefit is a reputation that holds steady instead of sliding. Turn warmup off, and you will not notice the slide for a month. Then one morning the placement tests land in spam, and you are back in the recovery section.

Ongoing warmup also protects you when a campaign goes wrong. If a batch of real sends earns complaints, the warmup pool’s positive signals cushion the damage, and the domain recovers faster. If a mailbox is paused for a week, its warmup keeps its reputation warm while it rests, so it is ready when it comes back. Think of warmup as the domain’s daily exercise: a little every day keeps it fit, and stopping entirely is how it goes soft.

How to warm up email domain: warming new mailboxes and domains

Every new mailbox you add needs its own warmup, from day one, at 5 to 10 emails a day, even if the domain is already warm. A warm domain does not make a cold mailbox warm, and a cold mailbox on a warm domain still sends cold mail. The same applies to every new domain: a second sending domain starts from zero, however well the first one performs, and it needs its own 2 to 4 week warmup. Plan for that when you scale. Adding a domain is a four-week commitment, not an afternoon’s work, and the senders who scale safely are the ones who start the next domain’s warmup a month before they need it.

Scale by adding warmed domains, not by pushing one domain harder. A domain that sends 40 emails per mailbox per day from three mailboxes reaches 120 sends a day safely. A domain pushed to 200 sends a day from the same mailboxes does not. When you need more volume, buy another sending domain, age it, warm it, and add its mailboxes to the rotation. That is how agencies send thousands of emails a day without burning a domain, and it is how you will scale too, one warmed domain at a time.

Free warmup, paid warmup or built-in warmup

The right warmup approach depends on what you already pay for, how many mailboxes you warm, and whether you want a single number that tells you when to send. In sum, the table below pairs each situation with the approach that fits it, so your budget goes towards replies instead of towards activity that never converts.

How to warm up email domain: the decision table

Your situationBest approachTool to start with
Already pay for a sequencerUse its built-in warmupInstantly from $47/mo, or Lemlist from $69/mo
Tiny budget, any toolFree warmup on every planQuickMail from $49/mo, AutoWarmer free
Want one readiness numberStandalone warmup with a scoreWarmforge from $9/slot/mo, send at 85+
Agency, many mailboxesUnlimited warmup per clientSmartlead from $39/mo, or Woodpecker from $35/mo
Want it done for youDone-for-you warmupInframail DFY $797/mo, min 3 months
Run your own serversInfrastructure plus a warmup toolDo You Mail $39/server/mo plus Warmforge

Last checked: 16 November 2026. Prices above come from the official pricing pages named in the tools section. Warmforge warmup is $12 a month billed monthly, $10 billed quarterly, or $9 billed annually per slot, with 1 free slot on signup. Inframail warmup is included only on its FREE DFY plan at $797 a month for a minimum of 3 months. Do You Mail has no warmup pool, so its row pairs it with Warmforge. Features and pricing can change, so please check the provider’s site before you buy.

How to warm up email domain: start with the free option

If your budget is zero, start with the tools that warm without charging extra. QuickMail’s AutoWarmer is free on every plan through MailFlow. That makes it the cheapest way to warm a mailbox properly. Warmforge gives you 1 free slot on signup, which is enough to warm your first mailbox and learn the Heat Score. A manual warmup costs nothing at all: exchange emails with colleagues, friends and existing contacts who will open and reply, for two to four weeks, and the provider will see a new sender whose mail is welcomed. The tool makes warmup easier, but it is not what makes warmup possible. The patience and the ramp are what make it possible, and those are free.

Our Best Cold Email Tools for Beginners guide ranks the cheapest honest starting points, and our Best Warmup Tools 2026 guide compares the warmup field in full. Start with the cheapest tool that warms properly, prove the habit works, and only then pay for the features that make warming faster. A $9 a month Warmforge slot that warms one mailbox properly beats a $107 a month plan that warms none, because the inbox is what pays, not the tool.

How to warm up email domain: when to pay for warmup

Pay for warmup when your volume earns it. If you warm ten mailboxes across three domains, a standalone tool with a Heat Score and placement tests is worth paying for, because it tells you, mailbox by mailbox, which ones are ready and which ones are not. Similarly, Warmforge at $9 a slot a month earns its price when you need that clarity, and Instantly at $47 a month earns its price when you want unlimited warmup, placement tests and sequences in one place. Below that volume, the free options do the same job, more slowly, and the money you save is better spent on a better list.

Pay attention to the hidden cost of warmup, too, which is time. A domain that is warmed properly takes two to four weeks, and a domain that is rushed takes four weeks to recover. The senders who win at cold email are not the ones who warm fastest. They are the ones who warm once, warm properly, and never have to do it again for that domain.

Frequently asked questions

How to warm up email domain: how long does warmup take?

Plan for 2 to 4 weeks before a new domain is ready for cold outreach, with a hard minimum of 2 weeks. Instantly’s 2026 guidance requires at least 2 weeks of warmup plus a health score above 90% before an account can join a campaign, and most senders are comfortably ready at the 3 to 4 week mark. Full campaign volume takes 4 to 6 weeks to reach, according to Instantly’s 2026 benchmark report. If you are warming a brand-new domain, 4 weeks is safer than 2, and the schedule in this guide shows the ramp week by week.

How to warm up email domain: how many emails should I send per day while warming up?

Start at 5 to 10 warmup emails per mailbox per day, ramp to 25 by day seven, and reach 50 to 75 by week three. Once placement is healthy, send 25 to 30 real emails per mailbox per day, with 40 as the maximum for any single mailbox. If you need more volume, add more warmed mailboxes and more warmed domains, instead of pushing one mailbox harder.

How to warm up email domain: can I warm up a domain manually, without a tool?

Yes. Exchange emails with colleagues, friends and existing contacts who will open and reply, for two to four weeks, starting at a few emails a day and ramping slowly. Manual warmup works, and it costs nothing, but it is slow, it does not rescue emails from spam automatically, and it gives you no Heat Score or placement test to tell you when you are ready. A tool automates the exchanges, the rescues and the measurement, which is why most senders use one.

How to warm up email domain: what is a good Heat Score?

Warmforge’s Heat Score runs from 0 to 100, and Warmforge says to start sending at 85 or higher. A score in the 90s means the mailbox providers trust the mailbox. A score in the 60s means they do not, yet, and you should keep warming at low volume. Instantly uses a similar health score, with a bar of above 90% before an account can join a campaign. Either way, the number is the decision, not the calendar: send when the score says ready, not when the weeks run out.

How to warm up email domain: do I need to warm up every mailbox?

Yes. Each mailbox builds its own reputation alongside the domain’s, and a warm domain with a cold mailbox still sends cold mail. Warm every mailbox you plan to send from, from day one, at 5 to 10 emails a day, and stagger new mailboxes so they reach full volume on different days. Connect at least two inboxes per domain so the volume spreads, and never send from a mailbox that has not been warmed.

How to warm up email domain: which tool is best for warming up?

Instantly leads for built-in unlimited warmup at scale, with a pool of more than 4.2 million accounts and inbox placement tests, from $47 a month on Growth. Warmforge leads for standalone warmup with a Heat Score, from $9 a slot a month on annual billing, with 1 free slot on signup. QuickMail leads for free warmup, with AutoWarmer included on every plan from $49 a month. Smartlead leads for agencies, with unlimited AI warmup from $39 a month. All eight tools in this guide are compared on price and features in the tools section.

The verdict on warming up a new email domain

Our verdict

Best for most senders: buy a separate sending domain, authenticate it, and age it for 7 to 14 days. Then warm it for 2 to 4 weeks, starting at 5 to 10 emails per mailbox per day and ramping to 25 to 30 real sends per mailbox per day. Send when your inbox placement is healthy, your spam rate is under 0.1%, and your Heat Score is 85 or higher, then keep 20 to 30 percent of your daily volume on warmup while you send.

For built-in unlimited warmup, Instantly leads, with a 4.2 million account pool from $47 a month. Warmforge leads for standalone warmup with a Heat Score, from $9 a slot a month. QuickMail leads for free warmup, with AutoWarmer on every plan from $49 a month. We have not hands-on tested these tools, so this guide gives Best-for labels only and no numeric score, and that is stated plainly.

Start this week with one domain, two mailboxes, and a warmup tool. Buy the sending domain, set up SPF, DKIM and DMARC, connect Google Postmaster Tools, turn warmup on at 5 emails a day, and watch the placement tests. In four weeks, that domain will be ready to earn you meetings, and the patience will have paid for itself many times over. Warmup is a habit, not a project, and the senders who keep the habit are the ones whose emails keep reaching the inbox.

Keep reading

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

OutreachCompare

Compare B2B email outreach tools — cold email, deliverability, data and verification, tested and ranked for startups, agencies and enterprises.

Compare B2B email outreach tools — cold email, deliverability, data and verification, tested and ranked for startups, agencies and enterprises.

© 2026 OutreachCompare. All rights reserved.

Designed with WordPress